Polygon Water Resistant Adhesive

Product Description :
As per the varying expectations of our customers, we ore specialized in providing an enormous quality range of POLYGON" to our clients. This POLYGON D' is mainly used in furniture industry such as Lamimate pasting, Postforming. Finger Joint C Bud Jointing & several other applications. Offered products are known for their non-toxic and non flammable properties. Used for Hot Press. Cold Press & Postforming

Areas of Application :

• Bonds laminate. plywood and other hard /soft wood. veneer. particle board. MDF. block board, hard board, etc.
• Specially made for the handicraft industry and bonds all typds of wood and ply to laminate. mainly in areas where furniture is affected by moisture/water like kitchens. bathrooms. etc.

Application Methods :

• The surfaces to be bonded should be free from dust, oil and grease. They,should be dry and properly leveled.
• For best results. roughen the surfaces to be bonded
• Stir contents of the container before use
• Can be diluted with clean water by continuous stirring, if needed (More than clean water should not be used)
• Apply an even cOat of POLYGON 0 first on comparatively non-porous surfaces and then on porous surfaces
• Excellent flow and spreodibility that can give higher coverage
• For Ply to Laminate, Before agdwing adhesive to dry, bring both surfaces in contact,,align properly and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensure uniform contact.
• For Wood To Wood: Before allowing adhesive to dry. bring both the surfaces in conk:Ida-arid align properly To get best results keep them pressed for 24 hours.
• Excess adhesive that oozes out from edges should be wiped off with a wet squeezed cloth
• Pressure can be applied bY using no.% clarnps. weight. Cold Press. Hot Press. Roller Press, etc.
• if required. pressure can be released after 6 to 8 hours and the bonded assembly can be processed further.

Product Features :

• 2 hrs. boiling waterproof, 72 hrs. normal waterproof
• High Strength cross linking Adhesive
• Excellent Spread abijity and High Coverage
• Excellent heat resistance

Product Compliance :

• Standards : equivalent to din en 204 stress group D3, reach compliance, low voc / Free Formaldehyde.